Name

The name of this device. (This is the device's "friendly name.")

Unique Device Name

The device's unique name.

Device Type

The device's device type.

Device Time Zone

The time zone where the device is located.

Description

The description of the device.

Address 1; Address 2; City; State or Province; Post Code

The address of the device's physical location.

NOTE: If the address fields are blank on this dialog, the address of the customer associated with this device's group is considered the device's address.

Unique Device ID

The device's internal numerical identifier (defined by the system).

Latitude
Longitude

The coordinates of the device's location on the globe.

Network address

If the device is contactable on the network, this is its IP address. If the device is non-contactable, this address is set to 0.0.0.0.

Network accessible

Yes if the device is contactable on the network; No if the device must poll.

Connection Mode

The device's mode of connection:

• Standard — The device is always connected to the Internet and has access to the Enterprise server.

• Courier — The device is a disconnected device. It may be a standalone device or belong to a local area network that does not have access to the Internet and, therefore, never has access to the Enterprise server. Service is provided to it via site visits and the Questra Courier application. (For information on site visits, see Site Visits - An Overview. For information on Questra Courier, refer to the Questra Courier User Guide, provided as a PDF with other Questra IDM Application Suite manuals.)

Serial Number

The device's serial number.

Retry court

If the device is contactable, this is the number of attempts (after a failed attempt) that are made to send a message to the device before the message is discarded. For example, a retry count of 3 results in four attempts (the first one that failed plus three more).

If the device is non-contactable, this is the number of poll cycles that can be missed before the message is discarded. For example, a retry count of 3 allows for four poll cycles to be missed (the first one that failed plus three more).

Retry Interval

(Contactable device only.) The number of seconds between attempts to send a message to the device.

Current Poll interval

(Non-contactable device only.) The number of seconds between attempts to poll the enterprise as currently set on the device.

Pending Poll interval

(Non-contactable device only.) A new poll interval that has been requested by a user but not has not yet been recognized by the device. Once the device receives the message that the poll interval has changed, the Current Poll interval and Pending Poll interval will be the same.

Extended Properties

One or more extended properties that have been defined for this device.